Have you wondered How to clean rolled floors and keep them with the same aspect as when did you installed them? Although their laminated soils look the same as wood soils, that does not mean that they should clean them in the same way. The best way to clean the laminated soils is not the same method as it would use to make those walnut planks shine in your living room.
Laminated plates need special care because, unlike wood soils, the surface cannot simply be repainted if spots, chafing or other types of damage are produced. To avoid expensive repairs and substitutions, it is essential to keep the soil material and treat it carefully, especially in areas of a lot of transit. (But don't worry, keeping the ground in good condition does not require much time, work or effort.
«Sweeping or passing the vacuum regularly, and passing the mop from time to time, will prolong the life of its soil and maintain it with the same aspect as the day of its installation,» says Jennifer Meska, director of commercialization of LL Flooring, who mentions that the laminate is usually less expensive than the authentic wood, so it has become the preferred option of many owners and builders.
Whether you have new laminated or vinyl soils as if you simply want your current surface to seem a new soil installation, here you have the best tips on laminated soils and the mistakes you should avoid.
1. Read the cleaning instructions that come with its laminated floor
Before starting, see the manufacturer's instructions on your soils. The brand may have specific recommendations based on the materials used. Most companies have detailed product guides and instructions on how to clean laminated soils on their websites. Read carefully, since the use of strong or abrasive cleaning products can cancel the guarantee.
2. Do not leave stains on the ground
«If something is spilled, clean it immediately,» says Steve Evans, an expert in Cleaning of Memphis Maids. «Use a dense microfibra cloth or a sponge and dryly dry to absorb what has been spilled.» 3. Face the spots soon. Even if your rolled floor is water resistant, if you leave liquids for too long, they can potentially damage or discolor the surface.
3. Do not use abrasive tools
Technology has made many of the most recent laminated materials resistant to scratches, but that does not mean that it should use abrasive objects (steel wool, for example). Use a soft bristle broom or a mop to sweep the remains. If the vacuum passes, be careful to use an accessory without a blender or rotating brush, which could scratch the surface.
4. FRIEGUE (carefully) the rolled floor every two months
To keep fresh laminated soils, limit them every two months. Wet mines (also known as microfiber mops) are soft enough to use them in laminated soils. If you are going to use a normal mop, drain it until it is almost completely dry.
5. Do not use too much water
«The number one factor to keep in mind is that laminated soils do not get along with water,» says Evans, «at least, with excess water. Keep water and liquids at least as long as they clean these soils» although the soil material is water resistant, it will not want the water to accumulate or filter through the upper layer, which could carry additional installation costs derived from the replacement of the replacement of the replacement of the replacement of the replacement of the replacement of the replacement of the replacement. That said, a traditional mop of mop is a non-no for laminated soils. If you forget to collect all the water, you can also cause spots or discoloration.